Painting Brake Calipers: What Do I Need to Know?

Over time, the car’s calipers can oxidize: what was once silver now looks dull and uneven and has turned into a rough, brown-tinted surface. Giving them color not only makes our travel companion look stylish, but it also looks neater, and, who knows, it could help increase its value if you plan on selling it in the future. Yes, for Painting Brake Calipers, you must have a set of concepts.

Nothing says “low class” more than poorly painted brake calipers on a poorly maintained vehicle. It is unclear when the trend started, maybe when the tires crossed the 17-inch mark. Historically, calipers were black, silver, or gold cadmium coating. Some say it’s the Ferrari F355, which started it with the tweezers Brembo red powder coated. After that, we’ve seen even the most humble of townspeople with painted calipers (and drums).

Painted brake calipers can add an eye-catching touch to vehicles with a particular color scheme or aesthetic (or you want to bring back the youth). However, it is necessary to paint them correctly, as incorrect paint application can cause brake problems. If some paint gets into areas around the braking system where it shouldn’t, it can affect the friction levels needed to bring a vehicle to a stop.

What should I do before painting the car brake calipers?

First of all, you have to remove the old calipers, rusty and dirty, with their associated supports. And with him, Since we are, you may want to change the brake fluid (It should be replaced approximately every 50,000 miles depending on your driving style. With the calipers off, be very careful. Were your parts good with a brake cleaner? Don’t worry if you see you spend a lot of product; you need a lot.

Then take a wire brush and go over all surfaces, especially where there is a lot of rust. Delete all hardware if you haven’t already and clean under that area thoroughly. You may also want to buy some new parts at this time, like some new pads or pins. They can make a big difference and prevent the caliper from sticking or the pins themselves from wearing unevenly. Use a screwdriver or gasket scraper to remove stubborn rust for tricky nooks and crannies.

How to Paint Brake Caliper?

Try to use a good painting designed for high temperatures. It must be durable and withstand: minimum of 250 degrees Celsius (°C)† Some paints can even withstand temperatures above 1,000°C. If you use a primer, make sure it is also heat resistant. However, before painting, place masking tape to mask the piston and rubber seals†. Remove all bolts from the caliper bracket, clean them and tape them close to you, so you don’t lose them.

Spray the paint liberally onto the clip more layers. Please don’t put it all in at once or it will spread and look extremely homemade. Let the paint sit for a few minutes between coats and voila until you see the painted surface is even. Be patient and repeat the process as many times as necessary. Once the work is done, let it dry for at least 24 hours† because time and the proper attention ensure that you have an end product that lasts for many months.

Considerations to keep in mind while painting brake calipers

When you remove the brake calipers, release the brake pads and store them in a safe place†. Because a vital point to keep in mind is not to paint the brake pads. If they become contaminated and get paint on the contact material, it can affect the necessary friction caused by braking and push the brake pads to become less effective.

It is essential to clean the brake calipers thoroughly before painting them. This is because any buildup or particles that get trapped under the paint will cause the paint to flake and peel sooner rather than later. Use a stiff wire brush and a suitable cleaning solution (available in supermarkets). online) to perform this step.

Mask sensitive areas† Use tape and newspaper for this. Cover all areas around the caliper to protect them from paint. It’s easier to take the time to properly coat these areas before painting than to try to do the job without masking. Otherwise, the fudge is sure.

Choose the right paint if you want the result to be worthwhile, and your brakes don’t scare you unforeseen. There are special paints, especially for brake calipers†. Remember that calipers experience a high degree of heat as part of the braking process, so manufacturers have developed unique formulas with the idea that these paints can withstand higher temperatures.

Putting paint desire and care† The best instruction for painting properly is to do one side of each clip at a time. Each coat of paint takes about half an hour to dry. Then apply a second coat. After another 30 minutes of drying time, apply two coats of paint to the other side. Make sure to do it evenly to avoid dripping. Ensure the paint is completely dry before putting the calipers back on the car.